Skip to main content Skip to footer content

Union MIPS Helmet

$160.00

With Thermostat Control Adjustable Venting, anti-odor padding, and a customizable fit at the turn of a dial, the Union™ MIPS® helmet comes fully loaded for your all mountain freeriding.

Union MIPS Helmet

$160.00

color Select color

Please make a selection

size Select Size

Size Guide

HOW TO MEASURE
SIZE GUIDE

HOW TO MEASURE YOUR SIZE

Wrap a measuring tape around your head, keeping the tape level from front to back. Note the measurement and reference the Size Guide.

SIZE	CIRCUMFERENCE
S	52 - 55.5cm
M	55.5 - 59cm
L	59 - 62.5cm
XL	62.5 - 65cm

Note: Make sure the helmet fits with a little room when the fit system is loose, and sits low enough to protect your forehead without hindering your vision. Once you’ve got the right size, you can adjust the fit.

HOW TO ADJUST THE FIT

Step 1: Adjust the fit system at the rear of the helmet for a snug, secure fit. Some helmets also include a vertical tuning feature that allows you to adjust the fore/aft tilt, for optimal positioning on your head.

Step 2: Adjust the straps so that they sit just below the earlobes.

Step 3: Step 3: Adjust the buckle so that it rests against the back of the jaw/throat.

Step 4: Adjust the interior pads if needed.

Step 5: Check the fit to make sure helmet is comfortable and secure. It should not roll forward or back, or be able to slide off.

Please make a selection

Select Styles for Availability

Join Waitlist

FIND IT LOCALLY

Details

In-mold construction and adjustable venting create a lighter, cooler helmet making the Union™ MIPS® ideal for both ascending and descending the slopes.

When things start to heat up, you can go the distance in comfort, as the XT2® anti-odor protection will prevent your helmet from getting stale, and the adjustable In Form Fit System will let you customize your fit at the turn of a dial. Rest easy knowing that the Multi-directional Impact Protection System (MIPS®) can provide more protection in certain impacts.

SKU #

Specs

Ventilation	Thermostat Control adjustable venting allows you to custom-tune airflow instantly with a simple, low-profile control button on the outside of the helmet Stack Vent™ Technology
Fit System	The In Form™ Fit System makes it easy to dial in a custom fit in seconds - even with gloves on. An ergo-friendly dial at the base of the helmet provides up to 6cm of adjustment and enhanced stability.
Weight	465g (size Medium)
Certification	CE EN1077

Features

INTEGRATED MIPS®

All Giro helmets are designed to reduce as much energy as possible while meeting and exceeding stringent safety standards. The goal of Giro's Integrated MIPS®-equipped helmets is to reduce rotational forces while enhancing fit and comfort by combining the MIPS slip plane with the helmet's adjustable fit system. Giro believes that helmets equipped with this technology can reduce the amount of rotational force that may be transferred to rider's brain in certain impacts. Learn more about MIPS in the video above.

HARDSHELL WITH IN-MOLD HARDBODY™ LOWER WRAP

The two-piece shell combines a tough outer hard shell with a polycarbonate lower shell permanently fused to the liner for durability without excess weight.

SEAMLESS COMPATIBILITY

For optimal performance of both helmets and goggles, Giro products are designed to work together, ensuring a seamless interface between helmet and goggle for an exceptional fit and dependable, worry-free function.

STACK VENT TECHNOLOGY

Our Stack Vent was developed based on research showing the majority of warm air that can cause fogging comes from the goggle's center top vent. Aligning the Stack Vent in the helmet with the center vent of the goggle helps keep it clear and fog-free.

THERMOSTAT CONTROL

Thermostat Control Adjustable Venting allows you to custom-tune airflow instantly with a simple, low profile control button on the outside of the helmet. No other system is faster or easier to adjust, and nothing is more effective at keeping you comfortable.