Experience warmth, ventilation, and Seamless Compatability with the Fade™ Mips® helmet, a comfortable and stylish helmet that also works with audio systems by Outdoor Tech®.
Fade Mips Helmet
Experience warmth, ventilation, and Seamless Compatability with the Fade™ Mips® helmet, a comfortable and stylish helmet that also works with audio systems by Outdoor Tech®.
Please make a selection
Size Guide
HOW TO MEASURE YOUR SIZE
Wrap a measuring tape around your head, keeping the tape level from front to back. Note the measurement and reference the Size Guide.
| ADULT SUPER FIT SIZE | CIRCUMFERENCE |
|---|---|
| S | 52 - 55.5 cm |
| M | 55.5 - 59 cm |
Note: We recommend you try helmets on before buying. Make sure the helmet fits with a little room when the fit system is loose, and sits low enough to protect your forehead without hindering vision. Once you’ve got the right size, you can adjust the fit.
HOW TO ADJUST THE FIT
Step 1: Adjust the fit system at the rear of the helmet for a snug, secure fit. Some helmets also include a vertical tuning feature that allows you to adjust the fore/aft tilt, for optimal positioning on your head.
Step 2: Adjust the straps so that they sit just below the earlobes.
Step 3: Adjust the buckle so that it rests against the back of the jaw/throat.
Step 4: Adjust the interior pads if needed.
Step 5: Check the fit to make sure helmet is comfortable and secure. It should not roll forward or back, or be able to slide off.
Please make a selection
-
Select Styles for Availability
Details
The Fade™ Mips® helmet is lightweight and comfortable thanks to a host of features including the In-Form Fit System and Thermostat Control Adjustable Venting.
You'll appreciate the details, from the earpads (which are compatible with aftermarket Giro audio systems by Outdoor Tech) to Seamless Compatibility with all Giro goggles. The Fade Mips® helmet is also equipped with the Multi-directional Impact Protection System which can provide more protection in certain impacts.
Specs
| Construction |
In-Mold Construction
|
|---|---|
| Ventilation |
Thermostat Control™ adjustable venting - allows custom-tuning of airflow instantly with a simple, low-profile control button on the outside of the helmet
Stack Vent™ Technology
|
| Fit System |
In Form™ 2 Fit System - lighter and lower-profile than the original, making it even easier to dial in a custom fit in seconds, even with gloves on.
On-the-fly Vertical Tuning - accommodates different goggles and head shapes for a custom fit free of gaper gap.
|
| Product Weight |
465g (size Medium)
|
| Electronics Compatibility |
Compatible with aftermarket Giro audio systems by Outdoor Tech
|
| Certification |
CE EN1077
|
| Highlights |
Plush Max padding
Seamless Compatibility with all Giro goggles
Mips® equipped
|
Features
INTEGRATED MIPS® BRAIN PROTECTION SYSTEM
All Giro helmets are designed to reduce as much energy as possible while meeting or exceeding stringent safety standards. The goal of Giro's Integrated Mips®-equipped helmets is to reduce rotational forces while enhancing fit and comfort by combining the Mips slip plane with the helmet's adjustable fit system. Giro believes that helmets equipped with this technology can reduce the amount of rotational force that may be transferred to rider's brain in certain impacts. Learn more about Mips in the video above.
HARDSHELL WITH IN-MOLD HARDBODY™ LOWER WRAP
The two-piece shell combines a tough outer hard shell with a polycarbonate lower shell permanently fused to the liner for durability without excess weight.
SEAMLESS COMPATIBILITY
For optimal performance of both helmets and goggles, Giro products are designed to work together, ensuring a seamless interface between helmet and goggle for an exceptional fit and dependable, worry-free function.
STACK VENT TECHNOLOGY
Our Stack Vent was developed based on research showing the majority of warm air that can cause fogging comes from the goggle's center top vent. Aligning the Stack Vent in the helmet with the center vent of the goggle helps keep it clear and fog-free.
VERTICAL TUNING
Accommodates different goggles and head shapes for a custom fit free of gaper gap
THERMOSTAT CONTROL
Thermostat Control Adjustable Venting allows you to custom-tune airflow instantly with a simple, low profile control button on the outside of the helmet. No other system is faster or easier to adjust, and nothing is more effective at keeping you comfortable.
IN FORM FIT SYSTEM
The In Form Fit System makes it easy to dial in a custom fit in seconds—even with gloves on. An ergo-friendly dial at the base of the helmet provides up to 6cm of adjustment and enhanced stability.
See It In Action
Related Products
