




Aerohead Mips II Helmet
Please select a size.
- The two‐piece shell combines a tough outer hard shell with a polycarbonate lower shell permanently fused to the liner for durability without excess weight.
- The Mips® Air Node system is a low‐friction layer laminated onto the base of the comfort padding, and is a lightweight and highly ventilated solution to reduce rotational energy. It is connected to the energy‐absorbing liner with nodes of hook‐and‐loop fabric touch fasteners. At angled impacts, the nodes are designed to release locally, allowing the padding to slide and reduce rotational motion to the head.
- In addition to helping to optimize stability and cooling airflow through the helmet, the micro‐adjustable ergonomic and compact dial allows riders to adjust vertical positioning and tune the contact points independently for a customized fit with exceptional comfort.
- Our proprietary Super Fit sizing system is based on "human scale factors" data and over 25 years of handcrafting helmets. By creating helmet molds in up to 4 adult sizes to match the human body's form, our Super Fit sizes comfortably and securely fit riders, and feel like they are custom made just for you.
- Giro helmets are developed utilizing our proprietary Wind Tunnel™ventilation system. This elaborate design combines active vents in the helmet's shell with exhaust channels inside the helmet that thrust fresh, cool air over and around the rider's head while forcing heat and stale air out. It's the most effective cooling system available, and a difference you can feel every time you ride.
- Pure Silver is the secret ingredient that gives IONIC+® the power to provide natural, permanent odor protection to keep your helmet feeling fresh.
- The inner liner of the helmet is aggressively engineered to assist air flowing through the helmet, working in conjunction with our Wind Tunnel vents to provide an easy pathway for cool air to flow in and hot air to exhaust out.
Technology

Hardshell With In-Mold Hardbody™ Lower Wrap
The two-piece shell combines a tough outer hard shell with a polycarbonate lower shell permanently fused to the liner for durability without excess weight.

IONIC+ ® Padding
Pure Silver is the secret ingredient that gives IONIC+ ® the power to provide natural, permanent odor protection to keep your helmet feeling fresh.

Deep Internal Channeling
The inner liner of the helmet is aggressively engineered to assist air flowing through the helmet, working in conjunction with our Wind Tunnel vents to provide an easy pathway for cool air to flow in and hot air to exhaust out.

Wind Tunnel Ventilation
Giro helmets are developed utilizing our proprietary Wind Tunnel ventilation system. This elaborate design combines active vents in the helmet's shell with exhaust channels inside the helmet that thrust fresh, cool air over and around the rider's head while forcing heat and stale air out. It's the most effective cooling system available, and a difference you can feel every time you ride.

Roc Loc® 5 Air Fit System
This revolutionary fit system adds a new dimension to helmet performance by enhancing cooling, as well as fit comfort and stability. Using a patented design that suspends the helmet just slightly off the top of the skull, Roc Loc® 5 Air allows cool airflow to pass directly over your head, further enhancing the performance of vents and internal channeling that exhaust heat out of the helmet. Fit and feel adjustments mimic the Roc Loc 5, allowing you to easily custom tune fit tension and fore-aft tilt of the helmet in seconds using a single hand.

MIPS® Air Node
The Mips® Air Node system is a low-friction layer laminated onto the base of the comfort padding, and is a lightweight and highly-ventilated solution to reduce rotational energy. It is connected to the energy-absorbing liner with nodes of hook-and-loop fabric touch fasteners. At angled impacts, the nodes are designed to release locally, allowing the padding to slide and reduce rotational motion to the head.

Super Fit™ Engineering
Our proprietary Super Fit sizing system is based on "human scale factors" data and over 25 years of handcrafting helmets. By creating helmet molds in up to 4 adult sizes to match the human body's form, our Super Fit sizes comfortably and securely fit riders, and feel like they are custom made just for you.


Size Chart
Bike Helmet Size Guide
How to measure your size – Wrap a measuring tape around your head, keeping the tape level from front to back. Note the measurement and reference the Size Guide. Note: Make sure the helmet fits with a little room when the fit system is loose, and sits low enough to protect your forehead without hindering your vision. Once you’ve got the right size, you can adjust the fit.

Adult Size | Circumference |
---|---|
S | 51 - 55 cm |
M | 55 - 59 cm |
L | 59 - 63 cm |
XL | 63 - 65 cm |
Universal Adult | 54 - 61 cm |
Universal Womens | 50-57 cm |
Universal X-Large | 58-65 cm |
Youth Size | Circumference |
---|---|
XS | 45 - 51 cm |
S | 49 - 55 cm |
Universal Child | 47 - 54 cm |
Universal Youth | 50 - 57 cm |
FOR HELMETS EQUIPPED WITH MIPS TECHNOLOGY, PLEASE REVIEW THE FOLLOWING WARNING: SOME MIPS® LOW-FRICTION LAYERS, ALONG WITH OTHER PARTS OF A HELMET, MIGHT CAUSE LACERATIONS TO THE WEARER’S HEAD/FACE IN SOME ACCIDENTS. THIS MIGHT OCCUR DUE TO THE HIGH PRESSURE ON THE SCALP FROM THE IMPACT OR AS A BY-PRODUCT OF THE LOW-FRICTION LAYER’S MOVEMENT IN CERTAIN ANGLED IMPACTS TO HELP REDUCE THE ROTATIONAL ENERGIES TO THE HEAD. IF YOU WOULD LIKE FURTHER INFORMATION, PLEASE CONTACT US.