Ledge MIPS Helmet
$90.00
Head to the park in style with the Ledge™ MIPS®, a hard-shell helmet that offers a minimalist look and the added benefit of the Multi-directional Impact Protection System.
Ledge MIPS Helmet
Head to the park in style with the Ledge™ MIPS®, a hard-shell helmet that offers a minimalist look and the added benefit of the Multi-directional Impact Protection System.
color
Matte Bright Red
size
Select Size
Size Guide
Size Guide
HOW TO MEASURE YOUR SIZE
Wrap a measuring tape around your head, keeping the tape level from front to back. Note the measurement and reference the Size Guide.
| SIZE | CIRCUMFERENCE |
|---|---|
| S | 52 - 55.5cm |
| M | 55.5 - 59cm |
| L | 59 - 62.5cm |
| XL | 62.5 - 65cm |
Note: Make sure the helmet fits with a little room when the fit system is loose, and sits low enough to protect your forehead without hindering your vision. Once you’ve got the right size, you can adjust the fit.
HOW TO ADJUST THE FIT
Step 1: Adjust the fit system at the rear of the helmet for a snug, secure fit. Some helmets also include a vertical tuning feature that allows you to adjust the fore/aft tilt, for optimal positioning on your head.
Step 2: Adjust the straps so that they sit just below the earlobes.
Step 3: Step 3: Adjust the buckle so that it rests against the back of the jaw/throat.
Step 4: Adjust the interior pads if needed.
Step 5: Check the fit to make sure helmet is comfortable and secure. It should not roll forward or back, or be able to slide off.
-
Select Styles for Availability
Details
The Ledge™ MIPS® helmet features a clean, minimalist skate-style design with hard-shell construction built for street and park riding.
Under-the-hood muscle meets modern technology with MIPS® (Multi-directional Impact Protection System), removable Auto Loc 2 Fit System and ample venting. The Ledge is super modifiable with removable goggle retainer and earpads to get just the right look.
SKU #
Specs
| Construction |
Removable goggle retainer
Removable earpads
|
|---|---|
| Shell Type |
Hard Shell construction produces great helmets at a great value. A rugged outer shell is molded and then attached to the EPS foam liner.
|
| Sport |
Snow
|
| Ventilation Type |
Stack Vent™ Technology
Super Cool Vents
|
| Gender |
Unisex
|
| Fit System |
The Auto Loc 2 Fit System is a removable, durable self-adjusting fit system designed to take the hassle out of fitting a helmet. A supple elastic fit band at the back of the helmet merges with fixed-position straps, which adjust to cradle your head when you set the system to one of three circumference settings.
On-the-fly Vertical Tuning - Accommodates different goggles and head shapes for a custom fit free of gaper gap
|
| Electronics Compatibility |
Compatible with aftermarket Giro audio systems by Outdoor Tech
|
Features
INTEGRATED MIPS®
All Giro helmets are designed to reduce as much energy as possible while meeting and exceeding stringent safety standards. The goal of Giro's Integrated MIPS®-equipped helmets is to reduce rotational forces while enhancing fit and comfort by combining the MIPS slip plane with the helmet's adjustable fit system. Giro believes that helmets equipped with this technology can reduce the amount of rotational force that may be transferred to rider's brain in certain impacts. Learn more about MIPS in the video above.
HARD SHELL CONSTRUCTION
Hard Shell Construction produces great helmets at a great price. A rugged outer shell is molded and then attached to the EPS foam liner.
SEAMLESS COMPATIBILITY
For optimal performance of both helmets and goggles, Giro products are designed to work together, ensuring a seamless interface between helmet and goggle for an exceptional fit and dependable, worry-free function.
STACK VENT TECHNOLOGY
Our Stack Vent was developed based on research showing the majority of warm air that can cause fogging comes from the goggle's center top vent. Aligning the Stack Vent in the helmet with the center vent of the goggle helps keep it clear and fog-free.
See It In Action
Related Products
