CHAPTER™ 2

Low profile and set up with our new Intake Port vent system; the chapter is the new architype for back country / all mountain riding. The deepest channels we have ever cut into a snow helmet pump air over your head to keep you cool and comfortable.

SKU# Chapter 2

Buy Now

$140.00

* Required Fields

Add to Compare

Matte White

Matte Pewter

Matte Black

Matte Tank Offset

Matte Black Pop Art

Barney

White Roofs

Specifications

In Form™ Sizes:: S (52 – 55.5cm), M (55.5 – 59cm), L (59 – 62.5cm)

Features:: In-mold construction; Interior subliner; 8 Super Cool vents with Thermostat control; Intake Port vent system; Stack Vent

Compatibility:: Compatible with all after market TuneUps systems.

Certification:: ASTM 2040 / CE EN1077

Fit Guide (pdfs):: Measuring Tape | Sizing Chart

Technology

IN FORM™ FIT SYSTEM: IN FORM™ FIT SYSTEM The In Form system makes it easy to dial in a custom fit in seconds - even with gloves on. An ergo-friendly dial at the base of the helmet provides up to 6cm of adjustment and enhanced stability while the vertical tuning feature accommodates different goggles and head shapes for a custom fit, free of gaper gap.
IN-MOLD CONSTRUCTION: IN-MOLD CONSTRUCTION In-mold construction fuses a tough polycarbonate outer shell with the helmet’s impact-absorbing foam liner. The fusion process allows us to sculpt better ventilation systems, so In-mold helmets can be lighter and cooler than traditional helmets.
SUPER COOL™ VENTS: SUPER COOL™ VENTS Super Cool vents pull cool, fresh air into the helmet while pushing heat and stale air out. By maximizing efficiency and optimizing vent shapes, the collective cooling power of Super Cool vents helps to regulate your core temperature and keep you feeling fresh all day.
INTERIOR SUBLINER: INTERIOR SUBLINER The interior subliner allows you to customize your pads or pull them out completely for the ultimate in rider tuned fit. A soft Velcro free fabric is laminated to the EPS foam on the inside of the helmet to make the fit more comfortable if you want to remove the padding to accommodate a beanie or goggle strap.
STACK VENT™: STACK VENT™ Our Stack Vent was developed based on research showing the majority of the warm air that can cause fogging exhausts from the center top vent of the goggle. Aligning the Stack Vent in the helmet with the center vent of your goggles helps to keep them clear and fog free while maintaining total helmet and goggle integration.
INTAKE PORT VENTILATION: INTAKE PORT VENTILATION Two vents at the brow of the helmet direct airflow to massive channels cut into the interior of the helmet foam. These channels then link to vents in the top and rear of the helmet. The result is the best ventilation system ever designed for a snow helmet. The unique TPU brim on the Chapter houses two Intake Port vents. However, rather than the air flowing directly onto your forehead which could cause uncomfortable focal points, it is redirected up into massive channels cut into the interior of the helmet foam. These channels then link to vents in the top and rear of the helmet which then exhaust the hot air trying to escape and replace it with the cool air being drawn in.

CHAPTER™ 2

CHAPTER™ 2

Specifications

Technology

Related Items